More pan action

I have been spending lots of time trying to get this done right. I learned the hard way on the left pan. If the pan is not sitting right on the brace, when you weld the floor to the pan it wants to lift up. I have a few spots on the left side that didn't come out well. I have been using some small sheet metal screws here are there. Also, start welding from the middle to the out side. I made the mistake of taking the outter edges. By the time I got to the outer edge, there was no room for the metal to go. So a little pounding with a BFH fixed the problem, not perfect but it will work.