Cut it out!!!!

Here is the 'usual' rust patches that appear on these old rusties.









As you care see the rust patch. After drawing the outline get out the cutoff wheel and cut the piece out. I saved this piece for my friend Phil.









Here is after the piece was cut out and the rust was ground down. My buddy Phil loves rusty cars.








I'm surprised there were no critters stuck inside this litte hole. Looks like this stuff has been in there for a few years eh!










This is what it should look like after you have cut a good section out and ground the rust down with a wire wheel. The next step now is to treat the rust and then apply some POR before welding up the patches.